-
Projects using msp430



The project we have created was a expandable drone using msp430 micro controller.

Here In the file containing containing the information on the project.

We have chosen a low power mode MC for controlling the drone
We have reduced the payload as much as possible
We can program for it any kind of applications as we like.

 we can select the above MC or the beside MC for main controller board



for more details on MC visit :http://www.ti.com/tool/ez430-rf2500

for details on ACCELEOROMETER AND GYRO
 visit :https://www.invensense.com/products/motion-tracking/6-axis/mpu-6050/

Comments

Post a Comment

Popular posts from this blog

"Kernel Panic” error After upgrading Parrot OS

-
Image
This guide will walk you through the steps of resolving the kernel panic error that you may encounter after upgrading your Parrot OS kernel to version 5.6.0. Step 1: Enter Recovery Mode Restart your computer and enter the GRUB menu by pressing the appropriate key during the boot process. The specific key may vary depending on your computer's manufacturer and BIOS settings. Common keys include F2, F10, Delete, or Esc. Once in the GRUB menu, select "Advanced Mode" using the arrow keys and press Enter. In the Advanced Mode menu, locate the entry for Parrot OS 6.1 and select "Recovery Mode" using the arrow keys. Press Enter to boot into Recovery Mode. Step 2: Purge Problematic Packages Once in Recovery Mode, log in as root using the default credentials. Open a terminal window by selecting "Drop to root shell prompt" from the Recovery Mode menu.
Read more

HACK HC-05(BLUETOOTH MODULE) FRIMWARE INTO HID FRIMWARE

-
Image
This post helps you to change the firmware of the hc05 Bluetooth chip into hid enabled Bluetooth chip. The HID stands for “HUMAN INTERFACE DEVICES” means things like your keyboard, mouse, printer, joysticks, etc.. Drivers get automatically installed in your computer without any external drivers needed.   The hc05 default don’t have hid capability but, the chip hc05 uses is same clone of chip RN-42 uses (BC417) , the RN-42 is an HID enabled chip. We gonna swap the firmware’s of rn42 into hc05. [NOTE: this particular hc05 chip comes with serial interface in it if you perform this swap it no longer work as serial Bluetooth chip. If you want you can save the firmware of hc05 and re-swap again to work normal]. That being said what are the things we need to perform this task are: 1.   HC05 module for sure (duh!) 2.   RN-42 chip {Wait if you are performing this task you must be very enthusiastic in electronics or extremely poor then why the hell you gonna buy an rn42 chip for..
Read more

HACK AND CLONE CAR KEY FOB, MY EPIC FAILURE...!!

-
Image
In this blog post i'm sharing my experience on cloning the my car key fob signal and how to do it properly. first things frist the cars now a days comes with a wireless remote key where u get atleast 2 or 3 options like lock,unlocking ,trunk(we call it as dickey!!!).....these options let your car access wirelessly and some cars are completly keyless for even driving. the keys of the cars are actually communicating with certain frequency like 433.xxxMHz or some countries uses 315.xxxMHz...the car companies uses an algorithm called " ROLLING CODES "...these are not that esay to crack cause they change every time u press key and once the key transmitted it cannot be used again... but a hacker named "samy kamakar" demonstrated an attack called REPLAY ATTACK where u simply transmitt the signal by recording the key fob away from car or blocking the signal and then recording. so this is how i've tried it..frist i needed to listen to the signals as possible in 10KHz
Read more